execute(add.set) does not work

[klesch]

I am experiencing that execute(add.set) does not work in LN 10.5. I've tried the execute() function with several other standard commands and they worked. But when I call execute(add.set) nothing really happens.

I was browsing the Xtreme and did not find anything useful.

Has anyone else experienced this? What is the workaround?

I thought asking here first before opening an Xtreme ticket.

Thanks.

[tmannais]

Originally Posted by klesch

I am experiencing that execute(add.set) does not work in LN 10.5. I've tried the execute() function with several other standard commands and they worked. But when I call execute(add.set) nothing really happens.

I was browsing the Xtreme and did not find anything useful.

Has anyone else experienced this? What is the workaround?

I thought asking here first before opening an Xtreme ticket.

Thanks.

It works properly on LN 10.6. I think it should work on 10.5 too.
Have you tried creating a new session and only use that command?
Just to see if the problem lies within the session you are working on.

[klesch]

Thank you very much for your reply, tmannais.

I tried what you are suggesting and the problem is the same.
If you have a little time, could you check my test session settings and the code here:
https://www.dropbox.com/s/p55ddx5w1k...oblem.pdf?dl=0

As mentioned, I tried several other commands (def.find, first.view, end.program ...) and they worked.

[tmannais]

Originally Posted by klesch

Thank you very much for your reply, tmannais.

I tried what you are suggesting and the problem is the same.
If you have a little time, could you check my test session settings and the code here:
https://www.dropbox.com/s/p55ddx5w1k...oblem.pdf?dl=0

As mentioned, I tried several other commands (def.find, first.view, end.program ...) and they worked.

I tried the same setting as you have. It works fine, but I am on LN 10.6 though.
Maybe it's worth an incident.
There might be some solution you are missing.
Or just wait for other gurus.

[klesch]

Thank you again. I think I will wait until Monday and then open an Xtreme ticket.

[klesch]

tmannais, could you please provide me with the Portingset version, Port Number, 4GL Engine version, and the Tools version of the system where execute(add.set) works fine?

Thank you very much in advance.

[tmannais]

Originally Posted by klesch

tmannais, could you please provide me with the Portingset version, Port Number, 4GL Engine version, and the Tools version of the system where execute(add.set) works fine?

Thank you very much in advance.

Here.

Latest Tools Version:10.60tt
4GL Engine:4GL Engine - mainttt10611, build 7000 (2019/02/17 20:54)
Portingset:9.3a
Port:8312

[klesch]

Thank you very much for your help. We have same Tools, but you have newer porting set. That might be it. I will let the Xtreme team know.