Baanboard.com

Baanboard.com (http://www.baanboard.com/baanboard/index.php)
-   Distribution, Transportation & Warehousing (http://www.baanboard.com/baanboard/forumdisplay.php?f=6)
-   -   Cycle Count (http://www.baanboard.com/baanboard/showthread.php?t=70123)

Gregory@2014 20th June 2017 15:19

Cycle Count
 
Hi all

Hope my question is posted in the correct forum :)

We recently introduced scanning using Warehouse Mobility and I have a question about the cycle count transaction.

Once the cycle count order has been generated (tdinv1220m000) and printed, the physical count can start.

Using a handheld scanner, the person doing the count types in the cycle count order number and the parts to be counted are populated on the scanner.
The physical counted quantities are then captured on the scanner (which is the same as tdinv1120m000 in BAAN).
All the parts in our warehouse is barcoded and we have the option the scan our part number.

My question is this:
Is it possible to customize the cycle count logic to tell BAAN which parts you counted and not BAAN tell you which parts to count?

Let's say the location A1 has 100 parts but some of the parts are physically in that location but not located (into A1) in BAAN.
When generating the cycle count order, BAAN will not pick up/"instruct" the counter to count the part which does not belong there.
We are looking for the option to count ANY part in that location and BAAN should pick it up as a variance.

Hope my long winded question makes sense.

erplncons 21st June 2017 07:53

Hi Gregory@2014 :
From what you have described above, it appears that you have also implemented lot and location control feature of BaaN. When you implement this feature, BaaN generates location based inbound / outbound advises for a location controlled warehouse.
In order for the system to work correctly, the physical inventory (location, lot and quantity) should replicate the system inventory. If there is no one to one relationship between system inventory and physical inventory, then it would be very difficult to control it.
So first you may have to bring in the control on physical inventory storage and the above issue would not arise.

avpatil 13th July 2017 18:40

Yes it is possible to customize which items to count. You can update last counting date and change inventory parameter. I have done this at my place.

Arvind Patil

Gregory@2014 14th July 2017 08:11

Thanks for the feedback guys.

sasikanth 24th July 2017 17:47

In LN, its a Standard Feature, and you need not to customize. Not sure about Baan IV & V.

Gregory@2014 27th July 2017 09:22

Hi all

Thanks - we are looking at upgrading to LN in the near future.


All times are GMT +2. The time now is 22:28.


vB.Sponsors
©2001-2017 - Baanboard.com - Baanforums.com